Wednesday, August 27, 2008

My Wood Fired Boiler Was Piped Wrong

TAM!!



[for the time being in German - sry folks, it's kinda a matter of time]
One thing first: This is not a traditionally manual for correct original Japanese Kimono. Even the pattern is simplified and not original.


You need:
[info] - material for yukata (summer kimono-home): the best cotton, linen, or similar substances that do not throw many wrinkles and rather stiff; for Kimono : satin, silk or cotton to each sample, NO! Gloss satin or silk, carnival, absolute no-go for kimono (and for Other Cosplay, by the way -.-) -
sewing machine would be an advantage

- Iron may or may not be
-
tape

how it works:)

First of all you need dimensions.
Where exactly is your As and Bs, etc are must, define their own - just where it is proportional terms the best looks (I know this is very vague and not exactly very traditional v__v)
a point is established and that is E , the kimono hem, which is namely in the ankle. For the other points you just look a few times Kimono pictures;)
must measure following her - from A (middle of the neck) to B
- E to F - from B to E - from B to C
- from B to D and multiply by 2
- it also needs the collar-length (blue mark) - that even from the front around your neck around to the front again measure
to any measure you should now add 4 cm seam allowance. can use these measurements to cut out their fabric pieces now (rectangles) in a sketch arrange such that it consumes as little material.

Remember, prior to multiply the distance BD.
- 2x the rectangle AB x BE = 2 backs
- 2 x EF x BE = 2 breast pieces
- 2x BD x BC = 2 sleeve
- 1x collar length x 14cm = collar
After cutting you go even to the sewing ^ ^


please note: I patterned fabric used on the left (= inside) is white - you can detect always good, what is inside and what outside.


Spread the two backs ahead of you, and then puts them together:
plugged the line AB (on the right side, where there's also been characterized) with pins and sew one long set.

A "Blitz seam" does better than a simple suture. Look, if you can find in your sewing this seam-type, if not, then at least a double seam due (ie a second time to sew the route).
(click to enlarge the image)





Sets the matter again before you. Now, the two breast pieces (left and right) to (pictured, all parts are equal, let yourself confuse them not, I used to date another pattern = bad choice)

flap breast parts of the pages from the inside.

(click to enlarge the image)



The segment AB is again stuck with pins and is to be sewn. Observed but before that their agents from the seam (in red circle) starting sewn together on each side about 10cm NOT. This is your neck and if the later are 10cm too narrow, you can unravel the still (what is ertseinmal better than too much neck, because you may slip from the shoulders of the kimono). You can check the neck before, when her kimono "try on"
what probably is an over throw first ^ ^ Also at this point, the "flash seam" on.
Spread the kimono once more before you, and specifies the sleeve parts on both sides as follows. (The yellow line marks the center)
From A to B is again pinned.
red mark: Before you sew AB, puts the matter only once as shown in the figure set (turn once and fixed with needles).

on both sides, please; top and bottom.
(click to enlarge the image)


Now you can both arms, from A to B Sew (flash seam).

Kimono spread:

from A to B and C of
stuck to D (each on both sides, of course)

-> the routes Sew by lightning seam to prevent fraying of the suture
red circle mark: I would recommend you, not with the machine until it stops to sew, but leaving a small opening and then by hand from right to sew (= outside), otherwise possibly arise unsightly wrinkles.
Next, they are hemmed sleeve openings. Turning to the kimono on the right (= outer side out, so how would it attract too) and take you from the sleeve opening.
Beat the edge at once.
Beat him for a second time and fixed him with pins.

the fixed sleeves with a normal seam sew.


Now you you should wear the kimono and determine whether the extent to which the fabric pieces are on the front of each other. If you this is too much material up front (varies depending on waist size), and if you can tweak a little. The kimono should be like in the picture above the other.


lines the line AB, as you have the sleeves hemmed (2x = turn).

Both
line fronts, ne;)


The collar:


Spread the flap of the collar on an ironing board from


it folds in half and ironed over it.

(click to enlarge the image)




Spread the collar again. Now you will collapse the bottom so far up that the collar half below the center fold is about 6cm wide. (See photo)
(click to enlarge the image)




press the section.
(click to enlarge the image)


power the entire length of the collar, always turn down a section, measure and fix by ironing.
After you've done that, the upper collar half folded down.

Sets the excess fabric of the overlying collar half to the inside (see photos) and fixed the whole thing by iron.



With the two ends of the collar should you proceed as follows: fix iron
+ by.
sew on the collar:


(And again lurks confusion danger. I'm here now a black collar on the photos, but this has to mean no more Just keep going ^ ^)

Marks the longitudinal center of the collar with a pin or tailor's chalk and spreads and kimono collar so Imagine this:

(The open side of the collar facing down)

the kimono fabric sets about 5cm into the collar. (The center of the entire kimono exactly in the longitudinal center of the collar)
(click to enlarge the image)




(The dotted line marks where the collar runs underneath the kimono) and with fold out a safety pin stuck:)

Works you in this way, each on both sides of the center until the points A and B. could at points A and B, with the net exposure of the kimono fabric in the neck are a bit short, but that is normal. As long as the kimono still mind extends about 1.5cm in the collar, everything is ok.


Sets the collar loose forward. Something like (black arrow) should the collar be:



The excess fabric corner (blue arrow) is EGTL disappear in the collar, But you can cut off even if the tip is too big: (to enlarge Click on the picture)







on the principle "collar wraps kimono fabric", you put on the kimono Vorderdeite of the fabric in the collar:


Make sure that the collar-end finishes clean on a line with the kimono-Rand.


When putting on the collar you have extremly be careful, that is best for a needle set to the next, so it is infected as smooth as possible, otherwise occur when sewing with the machine evil folds and shifts, which is really nothing around solemnly.
Smoothing Always nice everything.
If you this is successful, is only the hem (bottom of the kimono, to your ankles) from. Lined him as it the sleeve openings have missed (turn = 2x) and you are
..
OMG ..

done.
I really hope this was understandable and tutors has helped you or will you be beneficial.

Good luck and have fun in your kimono / yukata:)

Monday, August 25, 2008

1948 Grate White Shark Harpooned In Cuba

Kimono Tutorial




Note: This instruction may not be
traditionally correct. All measurements are by eye - I just tried to make wooden sandals that at least look like geta.
And sorry, I'm no native English speaker, if there'e anything you do not understand please feel free to ask:)




How to make your own Geta:



You will need: - a piece of 3 centimeter thick solid wood (any wood that is cheap/robust enough for you to buy/handle with)
- saw
- pins and a hammer - drill machine - wood glue
- fabric for the laces/straps
(again you can choose whatever you like, from classic traditional black cotton to fancy modern chinese pattern fabric - just google-search some geta pics for inspiration)
- cotton wool - durable cord/rope
(not too smooth, rather rough ) - 2 metal shank buttons
(
kind of like this one )
Let's get started:


1. At first you'll have to figure out what size your geta will be. Just place your foot on a piece of cardboard and determine what size will look good on your feet
(you can sketch the different sizes on the cardboard and cut them out to see what it looks like)
. Again I advise google-search for reference geta pictures. Now you should have the size for the rectangular basic form.
2. Next one to deal with is the size of the heels. I'm pretty sure there are certain general heights for geta sandals but I rly didn't care when I was making my geta xD. You can research this matter if you like.
The heels of my geta are 3 centimeter in height (adding the size of the sole wood = makes approximately 5 centimeter in total). So again it's left to you what your geta will look like. As you may have known they can vary from rather flat
to pretty high . Of course the heels have the same width as the rectangular sole.

3. Now you have to mark the measurements for each rectangle on your piece of wood and saw them. Note: You'll need 2 pieces for the shoe soles and 4 pieces for the heels. The more solid your wood is the longer your geta will be spared from abrasion
like this
. But it will get harder and harder to saw that wood unless you lucky fella own a electic saw. 4. Now each of your sole pieces need 3 boreholes. At first decide whether you want to have a left and a right sandal or simply two equal ones. Judging from the geta pictures out there, I think both is possible. Maybe a cheap pair of geta doesn't differ between left and right foot, while the more pricey ones do - I don't know.
For that I personally preferred the high-priced-look :P So step on your sole pieces and mark the area between your toes and at the sides where the sandal strap should go through the wood.
If you want to make the variant without a difference between left and right shoe, you have to check, if the marking is suitable for both of your feet.

(Keep in mind that the holes alongside your feet should be in front of the backmost shoe heel [picture] ) Please do not use these pictures as a scale - they're just sketches to convey the idea.


Makes markings on the other sole piece as well. Unless your right and left foot differ in shape and size, make sure that the hole marks are
symmetrical and even
. You can
bore the holes now. But maybe it's easier for you to drill them after you attached the heels because then the soles are lifted from the ground so that you don't have to worry about drilling all your way through the floor or something..

5. For the heel placement: Again there may be common japanese measurements. If I ever feel motivated enough to research them, I surely will post it here :)
I placed the backmost heel under my ..well.. heel. The front heel is supposed to be almost at the middle of the whole sole lenght. Just place it 1 centimeter alongside.

Affix the heels with wood glue. When the glue has dried additionally nail the heels. Place the nails there, where your foot will later cover them. For each cross seen in the picture below I suggest to drive in 2 nails side by side, again for more stability.

You should use long nails to preserve the best stability, but be extremely careful hammering them very straight into the heels (otherwise they might emerge at the sides)

The Straps:
1. First you need to measure what the lenghts of the straps will be. Step on your geta and place your feet correctly on them.


Measure from "a" over "b" to "c". Add 2 centimeter.
2. Cut out 2 pieces of your strap fabric: the lenght you just measured x 9 centimeter.
Fold the pieces of fabric in half and sew them lengthwise together (1 centimeter seam allowance). Now Reverse the fabric.
For each sandal strap cut 1,60 meter off the cord or rope and fold it in half. Drive the rope through the tube of fabric (by utilizing a safety pin as shown in the picture below) so that you get equal lenghts of rope sticking out.




Now stuff the tube with cotton wool. Not too tight please, because that will look ridiculous on your geta :D Of course to prevent the wool from pouring out and to fix the rope sew over the ends a couple of times.


3. To make the small slings that hold the large strap in place between your toes cut out a 6 x 8 centimeter piece of fabric for each sandal. Fold it in half and sew it lenghtwise. (If you're able to reverse the fabric - do it. I couldn't do it because the tube was too small.) For each sling cut off 20 centimeter cord and drive it through the small tube of fabric (Do not fold the cord in half this time).
4. Wow almost done *phew* Tuck the ends of the sling uncluding the extra cord sticking out through the "b" hole of your geta sandal. Put the large strap through the sling (red arrow in the picture).

The Ends of the strap are tucked through the "a" and "c" holes.
Now slip in the geta sandal and tighten strap and sling up by pulling the end pieces.

5. Now knot the extra cords from the large strap at the bottom side of your geta soles. Just be creative inventing knots and knot it like 5 times minimum because it has to be
reeeeeally
endurable.
But don't pull too hard so that you can't slip into your geta anymore because of the strap being too tight!
Now you have to knot the ends of the sling that goes between your toes. Take one of the shank buttons and thread the ends of the sling-extra-cord.


Make a knot as close as possible between the button and the sole. Add some extra knots for security. Cut off the spare rope and
LASTLY glue the button with some super strong glue on the sole. (for this step you will have to tuck some of the sling fabric and the shank of the button back through the drill hole.)

YOU'RE DONE!!!!


well..of course you will need to sand all edges if you haven't already done so.



Finally I recommend this video for further understanding on how geta work: 360° of Geta and some information on size and measurement


I encountered this video after making my geta, so there may be abberation to my geta. Please keep that in mind when you're going to comply with this tutorial.
I honestly hope this tutorial helped a bit and worked out for you.
Have fun walking around in your geta:)